Chain or cable may be used as immediate rails when installed to the above criteria. Toeboards shall be 4 inches minimum in vertical height and of any material which will provide the strength equivalent to a Standard Southern Pine 1 inch by 4 inch board.
What are acceptable forms of fall protection?
Generally, fall protection can be provided through the use of guardrail systems, safety net systems, or personal fall arrest systems. OSHA refers to these systems as conventional fall protection. Other systems and methods of fall protection may be used when performing certain activities.
What are the four OSHA requirements for fall protection?
OSHA requires that fall protection be provided at elevations of four feet in general industry workplaces, five feet in shipyards, six feet in the construction industry and eight feet in longshoring operations.
What can be used to protect workers from falling objects?
OSHA provides a number of falling object protection methods to select from, depending on your company’s need. The choices are toeboards and screens, guardrails, canopies, signs, barricades, or simply moving objects away from the edge.
How high can a platform be without a step?
15 inches
9. Platforms requiring only one step up shall be permitted to have a maximum height of 15 inches (38.1 cm).
How high can a platform be without a railing?
Specifically, all platforms 4 feet or more above the adjacent floor or ground must be protected by a standard guardrail on all open sides.
What are the 2 types of fall protection?
There are two major types of fall arrest: general (nets) and personal (lifelines).
What is the most common fall protection?
guardrails
On many sites, guardrails are the most common and convenient means of fall protection. Where guardrails cannot be used, workers must use another means of fall protection to prevent a fall. Two basic types of fall protection are travel restraint and fall arrest. Both involve wearing a full-body harness.
Which OSHA standard covers fall protection?
OSHA
- Part Number: 1926.
- Part Number Title:
- Subpart: 1926 Subpart M.
- Subpart Title: Fall Protection.
- Standard Number: 1926.501.
- Title: Duty to have fall protection.
- GPO Source:
Which of the following is not considered fall protection?
Safety belt is also used for protection but not in case of fall protection. They are used in the car as a safety device designed to prevent the person from harmful movement such as collision and sudden stop.
Is it legal to use chains for fall protection?
Becoming more aware of these hazards, OSHA made a specific change in the Walking/Working Surface rule that specifically prohibited chains in this function. Though OSHA never addressed the use of chains in the code, they were accepted as a legal means of fall protection in a couple of Letters of Interpretations.
What do you need to know about fall protection systems?
Guardrail systems used on ramps and runways shall be erected along each unprotected side or edge. Manila, plastic or synthetic rope being used for top rails or midrails shall be inspected as frequently as necessary to ensure that it continues to meet the strength requirements of paragraph (b) (3) of this section. “Safety net systems.”
Is it safe to use chains on a roof?
We’ve already published many articles on the danger of using chains as protection – from weak plastic chains to S-hooks that could come loose, to workers failing to re-hook them, or even unhooked chains being a tripping hazard near a roof or platform edge. For those reasons and more, chains always posed some danger as a fall solution.
Can a gate be used as a fall guard?
Often you may see safety chains or a single bar placed at 42’’ used in place of a gate or guardrail system to act as a fall protection method. Generally these chains or single bar preventions are inadequate, per OSHA’s requirement of “providing a level of safety equivalent to guardrails” (1910.29 (b) (10)).
