Schluter®-KERDI is a pliable, sheet-applied, bonded waterproof membrane and vapor retarder with limited crack-bridging capabilities. KERDI was developed as a waterproofing membrane to be used in conjunction with ceramic and stone tile coverings.
Can I use silicone instead of Kerdi-Fix?
The stuff works but there are cheaper products out there that do the same job. If using just for spots and corners and gaps, silicone or specialized bath sealant will do a great job just as much.
Does Kerdi-Fix sealant?
Kerdi-Fix is a single-component sealing and bonding compound with a silane-modified polymer base. Kerdi-Fix is odor-neutral, UV- and weather-resistant, and contains no solvents. It is suitable for use as a sealant and can be used to bond Kerdi-Band and Kerdi waterproofing membrane to fixed building elements.
Is Schluter Kerdi worth it?
It takes a little longer than the traditional mud shower bed and water-proofing methods, but it is worth it. My shower is water-tight, and the sloped floor drains water perfectly. The finished product looks great. I highly recommend.
Are both sides of KERDI-BOARD waterproof?
KERDI-BOARD is made from extruded polystyrene foam, with a cement-free reinforcement layer laminated to both sides and an anchoring fleece webbing. KERDI-BOARD is waterproof and vapor- retardant and can withstand all chemical stresses that typically occur in conjunction with ceramic tile coverings.
What is an alternative to Kerdi-Fix?
I ran out of Kerdi-Fix and had to get another tube quick and couldn’t wait the 2-3 days shipping. After a lot of research I discovered my local big box hardware store sold Sikaflex, a polyurethane sealant which bonded KERDI just as tight and tough as Kerdi-Fix if not better.
Is Kerdi-Fix necessary?
KERDI-FIX is required to bond the KERDI membrane to the stainless steel Schluter®-KERDI-DRAIN bonding flange and can be used to bond KERDI to building elements such as bathtubs, window elements, and door frames.
Is Kerdi fix necessary?
What is an alternative to Kerdi fix?
What is Kerdi fix and what does it do?
Kerdi-Fix is a Silane based humidity cure sealant used to attach Schluter Kerdi Membrane and Board to other fixtures such as tub flanges, baseboards, edge profiles, window flashings and more. IT IS NOT INTENDED TO SEAL TWO LAYERS OF MEMBRANE!!
How to waterproof a knee with Kerdi board?
Only three sides of the knee were waterproofed. I installed KERDI-BOARD on the face of the knee wall first and used one screw/washer every 10 inches for extra strength. Then the top using one screw/washer for every stud. And finally the last board was installed just like the other ones.
What’s the shelf life of Schluter Kerdi fix?
Unopened packages of KERDI-FIX can be stored in a cool location that is above freezing temperatures for up to 18 months. Once the cartridge has been opened, the material has a limited shelf life. Schluter®-KERDI-FIX is a single component, waterproof sealing and bonding compound with a silane-modified polymer base.
How to make a Kerdi board for a shower?
If you’re using the Schluter KERDI mixing valve seal, center it on the measurement for the mixing valve. Then trace the outline of the mixing valve seal onto the KERDI-BOARD and cut it out. Easy stuff. Slide the KERDI-BOARD over the plumbing and make any minor adjustments with your knife.
