A circle in the square symbolizes a clothes dryer. A square with a circle inside means that the item can be safely tumble dried, while the number of dots inside the tumble dry symbol indicates what temperature setting to use: one dot stands for low heat, two dots for medium, and three for high heat setting.
How do I turn off the delay on my Samsung dryer?
DELAY END
- Manually or automatically set your drying machine according to the type of laundry you are drying.
- Press the Delay End button repeatedly until the required delay time is set.
- Press the Start/Pause button.
- To cancel a Delay End function, press the Power button and then turn the dryer on again.
How do I fix the HC on my Samsung dryer?
Heating errors (HC, hE, HC4, 1 HC) This means that the dryer is getting too hot. The most common cause is a clogged lint screen or vent system trapping heat in the dryer. Clean the lint screen, vent system, or both to correct the error.
How do you reset the water sensor on a Samsung dryer?
Resetting your dryer is easy. Unplug it (or turn off power at the circuit breaker), wait some time for the electrical charge to clear out of the dryer (usually 1 to 5 minutes at most), and then power it up again. That’s it. That’s all it takes to reset.
How do I reset the error code HC on my Samsung dryer?
To reset this you usually just need to run a smart check on it. Press and hold the Timed button and the Mixed Load Bell button for several seconds and this will run a smart check on the dryer and it should clear any error codes stored in there.
Why is my Samsung dryer showing an hour glass symbol?
By continuing to use this site you consent to the use of cookies on your device as described in our cookie policy unless you have disabled them. My samsung dryer is showing an hour glass symbol and not…
What does hourglass icon mean on Windows 10?
This icon displays after every load as a reminder to clean the lint filter. The hourglass icon indicates that the number currently displayed on the panel is the time remaining in the cycle. The signal sounds (that occur at the end of a cycle) are turned off. The Mixed Load Bell option is turned on.
Why does my Samsung dryer light up at end of cycle?
If you don’t pause the cycle, it will continue normally. Heavier fabrics may not be dry when the cycle ends. This icon indicates the exhaust vent is in need of cleaning. After or during a cycle, it will light up if the exhaust vent is about 60 percent clogged.
What does the mixed load Bell on Samsung dryer mean?
This icon indicates that the Mixed Load Bell option is turned on. The Mixed Load Bell will signal when the cycle is 80% dry. This signal is so you will pause the cycle and remove the lighter, dryer fabrics, allowing the heavier fabrics to finish drying before the cycle ends.
