If the process fails, the iAquaLink device will need to have its memory cleared by physically toggling the WiFi-Wired switch to Wired then back to WiFi. This will restart setup mode so you may attempt to connect it to your eero network again.
Where do I find my AquaLink device number?
Enter the iAquaLink device number found on the door hanger or the device itself.
How do I reset my iAquaLink 2.0 WiFi?
Inside the iAquaLink 2.0, toggle the WiFi – Wired switch to clear the Wi-Fi settings and put the iAquaLink in desired setup mode. 3. After clearing the WiFi settings and with the Wired/ WiFi switch set to WiFi, use a smartphone or WiFi enabled device and go to WiFi settings.
How do I reset my AquaLink panel?
How do I Reset a Jandy AquaLink System?
- Press the “Menu” button.
- Scroll to and highlight “System Setup” using the arrow keys. Press “Enter.”
- Scroll to highlight “Clear Memory,” then press “Enter.” You have now reset your AquaLink system.
How do I update iAquaLink firmware?
If your phone is set to allow updates to be automatically installed, the iAquaLink app will update to the new version automatically. If your phone is set to allow manual updates only, you can download the iAquaLink app at the iOS App or Google Play App stores.
How do you read a Jandy serial number?
The serial# is on a white tag on the bottom of the power supply. For example, serial number CM3 86 can be read as follows: CM3 means it is a ClorMatic III, 01 is the year, 06 is the month, 13 is the day and 86 is the unit manufactured that day.
How do I know if a pool relay is bad?
Pool Clown Usually, when the relay goes bad it will stick in the on position, and you cant turn it off. If you hear a click in the outdoor panel when turning the motor on, I would confirm there is voltage at the motor.
How do I program my AquaLink rs8?
Basic Programming: To set a particular piece of equipment to turn on and off at a predetermined time, press the MENU button, press the forward arrow button to scroll to the PROGRAM menu, press ENTER, and then press the button for the equipment that you want to program.
How do I set up iaqualink on my phone?
After clearing the WiFi settings and with the Wired/WiFi switch set to WiFi, use a smartphone or WiFi enabled device to go to WiFi settings. Connect to the network labeled iAquaLink. iAquaLink will display the networks it detects, as well as signal strength. Select the network iAquaLink should use.
How to troubleshoot iaqualink on 5GHz network?
1 Due to the way iAquaLink searches for networks it is best practice to Disable the 5GHz Network to get setup. 2 Go to Settings–Troubleshooting–My device won’t connect. 3 Please remove any special characters from SSID/Password. 4 If you still are unable to connect, we recommend you contact iAquaLink for further assistance.
What should I do if my Eero iaqualink fails?
What’s the difference between iaqualink 1 and 2?
As a result, the original iAquaLink must use an ethernet connection while the iAquaLink 2.0 can connect wirelessly. iAquaLink 2.0 can be set up wirelessly using their Hotspot Method. Details for setup and troubleshooting are included below.
